Skip to main content

2026 Bobcat E48 Deluxe Mini Excavator Rental

4.5-ton. 124.5" dig depth. Enclosed cab. Foundations, trenches, drainage, no lowboy required. Operator available.

Day

$400

Week

$1,300

Month

$3,600

Operator Service

$750

4-hr block · machine included

Delivery

$100

flat · York County

What It's Built For

Foundation excavation, larger trenching, drainage work, and loading where a smaller machine would need multiple passes. The 42.6 HP Tier 4 engine runs without a DPF or SCR, no mid-job regen shutdowns, fewer failure points.

Bobcat E48 at a new construction framing site

Full Specs

SpecDetail
Weight class4.5-ton
Engine42.6 HP turbocharged Tier 4, no DPF/SCR
Bucket digging force9,601 lbf
Arm digging force5,820 lbf
Max dig depth (standard arm)124.5"
Max reach at ground level207.1"
Lift radius118"
Boom swing75° left / 50° right
Width72.8"
CabEnclosed, heat, AC, Bluetooth, heated suspension seat, wipers
Included buckets24" bucket, tiling & grading bucket
AttachmentsBobcat Hydra-Tilt-Swing coupler with a 36-inch grading bucket, plus standard buckets, thumb, breaker and auger. All priced separately.
Tilt range30° left and right, 60° total, X-Change mount
Rental rate$400 / day · $1,300 / week · $3,600 / month
Hydra-Tilt-Swing + 36-inch bucket$175 / day · $525 / week · $1,875 / month, rented with the machine
Operator service$750 / 4-hr block, operator + machine, all-in
Delivery$100 flat, York County core
Weekend rate$600 for Saturday and Sunday together, 1.5 × the day rate, 16 hours of use
FuelReturn it full. A tank under full is a $100 fuel charge.
CleaningReturn it clean and free of debris. A dirty return is a $145 cleaning charge.

What The Tilt Buys You

Hydra-Tilt-Swing range of motion Three views of a 36-inch grading bucket on the Hydra-Tilt-Swing coupler. The excavator arm stays in the same place in all three; only the coupler and bucket rotate, 30 degrees left, level, and 30 degrees right, for 60 degrees of total range. HYDRA-TILT-SWING, RANGE OF MOTION 30° left Level 30° right 60° of total tilt, so the bucket follows the grade instead of the machine chasing it. 36-INCH GRADING BUCKET ON THE HYDRA-TILT-SWING COUPLER · FITS THE BOBCAT E48
Hydra-Tilt-Swing range of motion A 36-inch grading bucket on the Hydra-Tilt-Swing coupler, shown tilted 30 degrees left, level, and tilted 30 degrees right. The excavator arm stays put in all three; only the coupler and bucket rotate, for 60 degrees of total range. HYDRA-TILT-SWING, RANGE OF MOTION 30° left Level 30° right 60° of total tilt, so the bucket follows the grade instead of the machine chasing it.
Cut a slope, clean a ditch or dig alongside a culvert without repositioning the machine every few feet. Diagram, not a photo of the unit.

Who This Machine Is For

Homeowners digging a foundation, footings, or driveway drainage. Contractors who need a second machine on site without a lowboy. If your job is behind a standard gate, the HY16C fits through at 43" wide.

Bobcat E48 digging around septic pipes

How It Works

Call or Request a Quote

Tell us what you're digging, your site access width, and when you need it.

We Confirm & Schedule

We check availability, match the right machine, and lock in pickup or $100 delivery.

Get to Work

Machine arrives fueled and inspected. Return it the same way when you're done.

Bobcat E48 Rental FAQ

Day rate is $400, weekly $1,300, monthly $3,600. Delivery is a flat $100. The operator service, which includes the machine, is $750 for a 4-hour block.

Schedule Your E48 Rental

Tell us the dig depth and site access, we'll confirm the machine fits before you book.

Call NowGet a Quote